|
 Conductor
copper, softly annealed (bare
or tinned)
diameter of single wire from 0.05 to 3.49 mm
in
cross-sections from 0.14 mm² to 300 mm²
in
the design
single-wire, stranded, finely stranded,
extra fine-wired
fibre optic cable
Insulation PVC
(polyvinyl chloride)
PE
(polyethylene)
PP
(polypropylene)
TPE-U
(polyurethane)
TPE-O
(thermoplastic polyolefinelastomers)
TPE-S
(thermoplastic elastomer on polystyrene
basis)
TPE-E
(thermoplastic polyester elastomer)
halogen-free polymer mixture (FRNC)
Core colours according to
DIN VDE 0293
DIN
VDE 0293-308
DIN
EN 50334
based on DIN 47100 and
draft
DIN VDE 0245-1 respectively
according to customer's requirement
Core marking colour gravure printing
ink jet printing
stamping
Stranding ply stranding and twisted in bundles,
also with longitudinal and crosswise banding
Shielding single, multiple with optimized copper braiding
shield helically wrapped
additional static shielding
|
Intermediate and outer sheath PVC
(polyvinyl chloride)
TPE-U
(polyurethane)
PE
(polyethylene)
TPE-S
(thermoplastic elastomer on polystyrene
basis)
halogen-free polymer mixture (FRNC)
Colour of outer sheath all colours based on RAL,
spcial colours possible
Marking of outer sheath colour gravure printing
ink jet printing
stamping
Achievable material properties flame-retardant
halogen-free
selft-extinguishing
thermostable (cross-linkage)
resistant to oil and fuel
hydrolytic stable
resistant to chemicals
microbe-resistant
long-term temperature range from -40° C
to +110° C
(also possible in combinations)
Make-up information round cables with a diameter from 1.0 mm
to 80 mm
1 to 100 cores, different core diameters can
be combined
insertion of supporting elements on textile basis
(also KEVLAR®)
insertion of supporting elements made of
steel rope
Cores and sheaths from a diameter of 1.4 mm
onwards can be provided with a marking or
printing.
|
